Abstracts 4 Articles Decision Making

which in tern routinizes administration. These tools cannot be used appropriately to manage of incalculable entities. The functional rationality approach is when activities precisely planned and estimated to reach some goal. This method is unlikely to be used by top managers because another important factors are involved such as ego or personal altitude. If there is no special procedure for a particular problem, manager should focus on how to turn a situation into the right way in accordance with expectations from their boss. Some managerial people cannot make their own judgments. Instead, they are looking up and looking around for someone else’s opinion and finally they rely on it because of personal fears or inexperience. Another example of it is the mid-level decision-making paralysis in many American companies when a manager is trying to avoid of making a decision. In the case of inevitable decision, he or she would engage as many colleagues as possible for self-protection. Many examples of recent administrative and economic problems within American companies have showed the tendency that managers are oriented to the short-term period when making decisions. This is due to the fact that MBA programs provide tools which are focuses mostly on a short-term attitude. The second reason would be that managers are under pressure for annual, quarterly, monthly and daily results and these factors push they out of thinking about the future, even though they realise that today’s minor difficulties could be tomorrow’s big crises. Managers are also aware of blame time and when things go wrong it is necessary to be protected from consequences. This is the reason why they gravitate towards this fear being punished rather than reflecting critically. Bureaucracy disrupts working processes into parts and the results of the work therefore disconnected with the decisions, which had been made. Manager’s productivity depends on the position within management circle or their supervisors. There is no codes or systems for tracking personal responsibilities to be established. To be successful manager means to move quickly within the levels of managerial hierarchy. It protects from going into problems too deeply at every level. Example I worked for four years as an instrument engineer in the Natural gas industry in Russia. I was involved into the decision making process associated with planning resources and finances for further projects and discussions about engineering-related difficulties. Firstly, when the question was complicated and involves financial resources, I checked the parameters of equipment many times and sent the results to my boss. When I received the confirmation from him, I printed it out and managed the necessary signatures on it. I did not want to be responsible for any inconvenience because my boss has to carry out this kind of responsibility. It was extremely important for me as a lower-level manager to have the document that proves that all things are done in time and approved by middle-level manager. In case of inconveniences such as the late commissioning phase of facilities I showed the documents that all the steps were completed by me on time. Reading 4. 2 Â  Reason, J. (1990) The general view on accident’s causes within complex technological systems includes theoretical framework which is not only provides the data on how dangerous factors could be combined themselves, but also where and how to predict these tendencies and take necessary measures beforehand. There are many elements of production, which are also involved into accident causation. Fallible high-level manager’s decisions are a major contributing factor to an increase in risk, followed by the lack of line management, which in turn causes dangerous preconditions and unsafe acts (intended and unintended). The latter are based on human’s psychological characteristics and conditions and are described as a combination of both potential hazards and errors, which could cause injury or damage. Likewise, a trajectory of an opportunity includes all these factors plus safeguards and productive events. Each of these has a window of opportunity in terms of an accident incidence. Therefore damage is highly possible when this trajectory is crossing all the windows at all the stages of production. The safe operation control consists of two features – feedback and response. The theory points out that the most successful approach to manage the safety is by taken into consideration the failure types rather than the failure tokens. According to Westrum (1988) there are three groups of auctions – denial, repair and reform. The successful organization is taken actions in responding to safely data from the reform (bottom level). The fundamental distribution error relates to a personal incompetence of employee while on the other hand the fundamental surprise error is the situation when personal observation differs to a reality. Thus, taken into consideration these terms and experience from the past major accidents such as Chernobyl, the nature of a malfunction has to be considered not only as pure technical but also as socio-technical. The people’s contribution to accidents is dominating the machine failure risk. Example I investigated many serious accidents related to the natural gas transportation process. For instance, one emergency stop of the 3. 2-megawatt gas turbine was caused by the malfunction of a frequency meter. After an analysis of reports I concluded that technical maintenance of this device was conducted improperly. A responsible worker forgot to finish one procedure related to the metrology accuracy of this piece of equipment. Another example is when other gas turbine was stopped by alarm during normal working cycle. The reason for that was unplanned and uncoordinated upgrade of its automatic control system (ACS). From my point of view, the modern technology is very reliable and ACS is highly faultness but social factors as well as poor decision making are of the major reasons for emergency situations. For instance, social factors in Russia are included a low salary and the lack of a proper education. Reading 6. Beach (1993) A descriptive Image theory focuses on people’s individual decisions rather than group ones, and it is directly opposite to prescriptive classical theory of making decisions. There are also three decision-related images (structures), which have to be possessed by a decision maker. The value image is based on personal principles, behavior and beliefs. These are the sou rce for generating goals. Thus, the ultimate criteria for this is when the decision maker consider the values to be relevant. Therefore potential goals and actions, if they are inconsistent with the relevant principles, will be refused. The second image, which is called the trajectory image, includes potential goals, which have to be set and the third one, the strategic image, focuses on actions and plans that have to be performed for achieving targets. The important parts of the third image are tactic and forecast, which would be a crucial factors for monitoring a realisation progress of a particular goal. Decision-making process consists of two types of decisions such as adoption and progress which include the implementation of the compatibility and profitability tests. The compatibility test is based on both types of decisions and compares candidates to three images, whereas in contrast the profitability test relates to the adoption decision only and uses the outcome after performing the compatibility test. For instance, the compatibility test selects few candidates, who successfully crossed through a selection criteria and the profitability test therefore chooses the best candidate from the previous sorting. Another important part of the Image theory is the process of framing decisions which is the action when the goal is identified and the plan is alled back if one exists. The data from the practical research suggests that it is unlikely that the decision maker tend to change the selection criteria without changes in principles, goals and plans. Example I was involved into the process of interviewing new workers within the Natural gas industry. I had to employ personnel with sufficient technical knowledge and skills because they have to work with in hazardous areas and on potentially dangerous equipment. As a team leader I was hoping to find highly qualified workers with extensive experience for an average amount of salary. After performing several meetings and consultations with potential staff within this salary category I concluded that no one was able to pass the criteria and possess theoretical knowledge and practical achievements from previous work experience. Because of that I decided to change the working images by changing the criteria. Therefore, I focused on workers who possess theoretical knowledge with engineering ideas in complex. Although they did not have extensive experience, they satisfied basic criteria and were able to perform tasks within their role (maintenance and repair). And after this correction of principles I recruited staff for my team successfully. Reading 7. 3Â  Janis (1971) Groupthink is a way of thinking when members behave with a high level of concurrence and tend to adopt a soft line of criticism on colleague’s ideas or even on every critical issue. This is why they make inhumane decisions easily with serious consequences such as the huge number of people’s deaths. The more cohesive the group, the more the risk that the decision will be proposed without the deep analysis of other choices. There are eight major symptoms of groupthink such as invulnerability, irrationality, ignorance of moral principles, stereotyped and unrealistic positions, group pressure against any critical views, member’s self-censorship, unanimity tendency within a group and the mind guard which is to protect the decision from any kind of the feedback. These indicators are typical for a bad decision making process which in tern may results the inhumane decision with serious consequences. Several steps could be adopted to prevent any group from group thinking. In this case criticism should be accepted not only by members but also by a leader. Wide range of alternatives should also be taken into account as possible options. In a case of vital decisions several groups with different leaders should be established to work on the same problem. Before the final decision is made each member should discuss considerations in its unit of organisation and then provide a final response to the group. An outside expert should be invited to all meetings. One decision-maker within the group should criticise a position of the majority. In the case of consensus the group should organise the final meeting for listening and discussing any doubts against the final decision. Although these actions have also drawbacks. For instance, when growing crisis requests an immediate solution there is no time for discussions and implementing many steps for decision making. Another example might be that the risk of the leakage of vital information would significantly increases when outside specialists are involved. All in all, it seems to be clear that top priority should be given in the prevention of any policymaking unit from the group thinking. Behavioral scientists should also be involved into these processes. Example During my work in Russia a groupthink was played a crucial role because of many factors. Firstly, my colleagues were really close to each other and the company’s social policy was developed for this purpose. Therefore, we spent some days playing games and sports altogether. This resulted in the number of small close-connected teams within the group. Another point is that my boss had a top role during all the process of discussion. Therefore, I had een many examples of bad decision-making. For instance, the only criticism from experienced and old colleagues was taken into account despite obvious things that were given by young professionals. Another factor is that the small teams did know how to play games within this environment and how to speculate. From my point of view, taking into consideration the long-term period, most of the final decisions were satisfactory but insufficient. It means that the p rojects were performed according to the rules and practices within timelines. But it can be clearly seen that due to the lack of criticism, for example, the total cost of the projects was increased. This way if the rules and steps of good decision practice were implemented, the cost and efficiency would significantly increase. Reading 8. 2Â  Callon (1987) The development of the technology has been explained by many social scientists using different available methods but they have not taken into account the point that the issue of the technology itself can also be represented as a sociological tool for an analysis. This also leads to the changes in understanding the dynamics of technology. There are two sociological views on the dynamic of consumption, which were developed by sociologists Touraine and Bourdieu. Touraine showed that French consumers’ behavior mostly dictated by large monopolies and industry, whereas in contrast Bourdieu pointed out that competition between social classes within French society taken the first place in terms of consumption of goods and services. Therefore these theories were shown by battle between engineers of two powerful French companies in the early 1970s: Electricite de France (EDF) and Renault. Despite the fact that both of them successfully proposed the concept of an electric car (VEL), the EDF’s theory failed because of unsolved technological difficulties related to the area of science and economy of the VEL, but the Renault did survive in the market because it focuses on not only the technological factors but also on rational views. This is the controversial result, because from the sociological point of view Renault’ specialists won this battle by a chance nor by implementing genius technological ideas. This experience of engineers-sociologists is possible to use as a new methodological tool for exploring large sections of society as well as researching within the value of role of social movements in the progress of consumption. There is also a helpful tool which is named the actor network. It is the case when company’s technological strategy supported by many sections of society. It describes the dynamics of society in completely different way without using sociological explanations. Firstly, in the case of implications of radical innovations within a technological sector engineers must mix technical and scientific analysis with sociology. Secondly, the actors network approach is efficient because it takes into account outside factors, which are related to common concepts of systems. Example I was responsible for implementing the concept of using compressed natural gas (CNG) as fuel for private cars and municipal buses instead of regular petrol. I was focused on the public transport such as buses because of the potential reduction of pollutions as well as the decrease of the total cost of fuel consumption. Moreover, it was easier to install the necessary equipment on buses because the government agreed to subsidise the cost of these modifications. Whereas in contrast I concluded that private car owners would not agree with this idea because the Siberian region in Russia is a large area and the number of CNG filing stations was limited to only 7. Thus, it was clear for me that using CNG fuel people could not travel between major cities which is crucial factor. This approach was based on social behavior of people and their habits. Therefore, the main target for our new policy was a municipal transport within major cities. Abstracts 4 Articles Decision Making which in tern routinizes administration. These tools cannot be used appropriately to manage of incalculable entities. The functional rationality approach is when activities precisely planned and estimated to reach some goal. This method is unlikely to be used by top managers because another important factors are involved such as ego or personal altitude. If there is no special procedure for a particular problem, manager should focus on how to turn a situation into the right way in accordance with expectations from their boss. Some managerial people cannot make their own judgments. Instead, they are looking up and looking around for someone else’s opinion and finally they rely on it because of personal fears or inexperience. Another example of it is the mid-level decision-making paralysis in many American companies when a manager is trying to avoid of making a decision. In the case of inevitable decision, he or she would engage as many colleagues as possible for self-protection. Many examples of recent administrative and economic problems within American companies have showed the tendency that managers are oriented to the short-term period when making decisions. This is due to the fact that MBA programs provide tools which are focuses mostly on a short-term attitude. The second reason would be that managers are under pressure for annual, quarterly, monthly and daily results and these factors push they out of thinking about the future, even though they realise that today’s minor difficulties could be tomorrow’s big crises. Managers are also aware of blame time and when things go wrong it is necessary to be protected from consequences. This is the reason why they gravitate towards this fear being punished rather than reflecting critically. Bureaucracy disrupts working processes into parts and the results of the work therefore disconnected with the decisions, which had been made. Manager’s productivity depends on the position within management circle or their supervisors. There is no codes or systems for tracking personal responsibilities to be established. To be successful manager means to move quickly within the levels of managerial hierarchy. It protects from going into problems too deeply at every level. Example I worked for four years as an instrument engineer in the Natural gas industry in Russia. I was involved into the decision making process associated with planning resources and finances for further projects and discussions about engineering-related difficulties. Firstly, when the question was complicated and involves financial resources, I checked the parameters of equipment many times and sent the results to my boss. When I received the confirmation from him, I printed it out and managed the necessary signatures on it. I did not want to be responsible for any inconvenience because my boss has to carry out this kind of responsibility. It was extremely important for me as a lower-level manager to have the document that proves that all things are done in time and approved by middle-level manager. In case of inconveniences such as the late commissioning phase of facilities I showed the documents that all the steps were completed by me on time. Reading 4. 2 Â  Reason, J. (1990) The general view on accident’s causes within complex technological systems includes theoretical framework which is not only provides the data on how dangerous factors could be combined themselves, but also where and how to predict these tendencies and take necessary measures beforehand. There are many elements of production, which are also involved into accident causation. Fallible high-level manager’s decisions are a major contributing factor to an increase in risk, followed by the lack of line management, which in turn causes dangerous preconditions and unsafe acts (intended and unintended). The latter are based on human’s psychological characteristics and conditions and are described as a combination of both potential hazards and errors, which could cause injury or damage. Likewise, a trajectory of an opportunity includes all these factors plus safeguards and productive events. Each of these has a window of opportunity in terms of an accident incidence. Therefore damage is highly possible when this trajectory is crossing all the windows at all the stages of production. The safe operation control consists of two features – feedback and response. The theory points out that the most successful approach to manage the safety is by taken into consideration the failure types rather than the failure tokens. According to Westrum (1988) there are three groups of auctions – denial, repair and reform. The successful organization is taken actions in responding to safely data from the reform (bottom level). The fundamental distribution error relates to a personal incompetence of employee while on the other hand the fundamental surprise error is the situation when personal observation differs to a reality. Thus, taken into consideration these terms and experience from the past major accidents such as Chernobyl, the nature of a malfunction has to be considered not only as pure technical but also as socio-technical. The people’s contribution to accidents is dominating the machine failure risk. Example I investigated many serious accidents related to the natural gas transportation process. For instance, one emergency stop of the 3. 2-megawatt gas turbine was caused by the malfunction of a frequency meter. After an analysis of reports I concluded that technical maintenance of this device was conducted improperly. A responsible worker forgot to finish one procedure related to the metrology accuracy of this piece of equipment. Another example is when other gas turbine was stopped by alarm during normal working cycle. The reason for that was unplanned and uncoordinated upgrade of its automatic control system (ACS). From my point of view, the modern technology is very reliable and ACS is highly faultness but social factors as well as poor decision making are of the major reasons for emergency situations. For instance, social factors in Russia are included a low salary and the lack of a proper education. Reading 6. Beach (1993) A descriptive Image theory focuses on people’s individual decisions rather than group ones, and it is directly opposite to prescriptive classical theory of making decisions. There are also three decision-related images (structures), which have to be possessed by a decision maker. The value image is based on personal principles, behavior and beliefs. These are the sou rce for generating goals. Thus, the ultimate criteria for this is when the decision maker consider the values to be relevant. Therefore potential goals and actions, if they are inconsistent with the relevant principles, will be refused. The second image, which is called the trajectory image, includes potential goals, which have to be set and the third one, the strategic image, focuses on actions and plans that have to be performed for achieving targets. The important parts of the third image are tactic and forecast, which would be a crucial factors for monitoring a realisation progress of a particular goal. Decision-making process consists of two types of decisions such as adoption and progress which include the implementation of the compatibility and profitability tests. The compatibility test is based on both types of decisions and compares candidates to three images, whereas in contrast the profitability test relates to the adoption decision only and uses the outcome after performing the compatibility test. For instance, the compatibility test selects few candidates, who successfully crossed through a selection criteria and the profitability test therefore chooses the best candidate from the previous sorting. Another important part of the Image theory is the process of framing decisions which is the action when the goal is identified and the plan is alled back if one exists. The data from the practical research suggests that it is unlikely that the decision maker tend to change the selection criteria without changes in principles, goals and plans. Example I was involved into the process of interviewing new workers within the Natural gas industry. I had to employ personnel with sufficient technical knowledge and skills because they have to work with in hazardous areas and on potentially dangerous equipment. As a team leader I was hoping to find highly qualified workers with extensive experience for an average amount of salary. After performing several meetings and consultations with potential staff within this salary category I concluded that no one was able to pass the criteria and possess theoretical knowledge and practical achievements from previous work experience. Because of that I decided to change the working images by changing the criteria. Therefore, I focused on workers who possess theoretical knowledge with engineering ideas in complex. Although they did not have extensive experience, they satisfied basic criteria and were able to perform tasks within their role (maintenance and repair). And after this correction of principles I recruited staff for my team successfully. Reading 7. 3Â  Janis (1971) Groupthink is a way of thinking when members behave with a high level of concurrence and tend to adopt a soft line of criticism on colleague’s ideas or even on every critical issue. This is why they make inhumane decisions easily with serious consequences such as the huge number of people’s deaths. The more cohesive the group, the more the risk that the decision will be proposed without the deep analysis of other choices. There are eight major symptoms of groupthink such as invulnerability, irrationality, ignorance of moral principles, stereotyped and unrealistic positions, group pressure against any critical views, member’s self-censorship, unanimity tendency within a group and the mind guard which is to protect the decision from any kind of the feedback. These indicators are typical for a bad decision making process which in tern may results the inhumane decision with serious consequences. Several steps could be adopted to prevent any group from group thinking. In this case criticism should be accepted not only by members but also by a leader. Wide range of alternatives should also be taken into account as possible options. In a case of vital decisions several groups with different leaders should be established to work on the same problem. Before the final decision is made each member should discuss considerations in its unit of organisation and then provide a final response to the group. An outside expert should be invited to all meetings. One decision-maker within the group should criticise a position of the majority. In the case of consensus the group should organise the final meeting for listening and discussing any doubts against the final decision. Although these actions have also drawbacks. For instance, when growing crisis requests an immediate solution there is no time for discussions and implementing many steps for decision making. Another example might be that the risk of the leakage of vital information would significantly increases when outside specialists are involved. All in all, it seems to be clear that top priority should be given in the prevention of any policymaking unit from the group thinking. Behavioral scientists should also be involved into these processes. Example During my work in Russia a groupthink was played a crucial role because of many factors. Firstly, my colleagues were really close to each other and the company’s social policy was developed for this purpose. Therefore, we spent some days playing games and sports altogether. This resulted in the number of small close-connected teams within the group. Another point is that my boss had a top role during all the process of discussion. Therefore, I had een many examples of bad decision-making. For instance, the only criticism from experienced and old colleagues was taken into account despite obvious things that were given by young professionals. Another factor is that the small teams did know how to play games within this environment and how to speculate. From my point of view, taking into consideration the long-term period, most of the final decisions were satisfactory but insufficient. It means that the p rojects were performed according to the rules and practices within timelines. But it can be clearly seen that due to the lack of criticism, for example, the total cost of the projects was increased. This way if the rules and steps of good decision practice were implemented, the cost and efficiency would significantly increase. Reading 8. 2Â  Callon (1987) The development of the technology has been explained by many social scientists using different available methods but they have not taken into account the point that the issue of the technology itself can also be represented as a sociological tool for an analysis. This also leads to the changes in understanding the dynamics of technology. There are two sociological views on the dynamic of consumption, which were developed by sociologists Touraine and Bourdieu. Touraine showed that French consumers’ behavior mostly dictated by large monopolies and industry, whereas in contrast Bourdieu pointed out that competition between social classes within French society taken the first place in terms of consumption of goods and services. Therefore these theories were shown by battle between engineers of two powerful French companies in the early 1970s: Electricite de France (EDF) and Renault. Despite the fact that both of them successfully proposed the concept of an electric car (VEL), the EDF’s theory failed because of unsolved technological difficulties related to the area of science and economy of the VEL, but the Renault did survive in the market because it focuses on not only the technological factors but also on rational views. This is the controversial result, because from the sociological point of view Renault’ specialists won this battle by a chance nor by implementing genius technological ideas. This experience of engineers-sociologists is possible to use as a new methodological tool for exploring large sections of society as well as researching within the value of role of social movements in the progress of consumption. There is also a helpful tool which is named the actor network. It is the case when company’s technological strategy supported by many sections of society. It describes the dynamics of society in completely different way without using sociological explanations. Firstly, in the case of implications of radical innovations within a technological sector engineers must mix technical and scientific analysis with sociology. Secondly, the actors network approach is efficient because it takes into account outside factors, which are related to common concepts of systems. Example I was responsible for implementing the concept of using compressed natural gas (CNG) as fuel for private cars and municipal buses instead of regular petrol. I was focused on the public transport such as buses because of the potential reduction of pollutions as well as the decrease of the total cost of fuel consumption. Moreover, it was easier to install the necessary equipment on buses because the government agreed to subsidise the cost of these modifications. Whereas in contrast I concluded that private car owners would not agree with this idea because the Siberian region in Russia is a large area and the number of CNG filing stations was limited to only 7. Thus, it was clear for me that using CNG fuel people could not travel between major cities which is crucial factor. This approach was based on social behavior of people and their habits. Therefore, the main target for our new policy was a municipal transport within major cities.

Construction & Diagnostic of Recombinant DNA Plasmid Research Paper

Construction & Diagnostic of Recombinant DNA Plasmid - Research Paper Example The experiment established that the competency of cells increased greatly.   In the next experiment, running PCR provided me with an amplified His3 gene which is used in subsequent steps to transform haploid yeast. Transformation occurred through homologous recombination. The experiment proved that specific integration does occur although cases of non-specific integration are rampant. In the next experiment, I constructed a sub-clone of the HIS3 gene and inserted it into a plasmid pSP72 making a recombinant plasmid which I used to transform bacterial cells. In order to determine whether the integration was successful, I extracted the plasmid to analyze if the inserted gene was present. However, I established that integration had not been successful. Introduction One of the laboratory techniques that help in understanding the basics of knocking out genes is the standardized procedure of replacing the ADE2 gene responsible for adenine biosynthesis with HIS3 that is responsible for on e of the steps in histidine amino acids. The procedure involves production of a hybrid polymerase chain reaction (PCR) as the first step. The hybrid product constitute of the vector DNA template and the primers of choice. Running of the PCR major steps produces the hybrid product. Agarose gel electrophoresis helps in determining whether PCR amplification occurred. The next step involves the transformation of yeast cells with the hybrid PCR product. The last step involves analysis of r4esults and morphology of transformed yeast cells. Other experiments involve transforming competent Escherichia coli cells with the use of a plasmid as a vector. This transformation follows the recombinant DNA technology protocol. The general procedure starts with digestion of plasmid DNA and template DNA of interest with restriction enzymes to generate DNA fragments with sticky ends. The second step involves ligation of the DNA fragments using DNA ligase, forming a recombinant plasmid. The next step in volves insertion of the recombinant plasmid into the competent bacterial cells. The final step involves plating on appropriate media and selection of transformed cells. In addition, performing a backward procedure of isolating the plasmid from the transformed cells verifies insertion at the right locus. Laboratory 1: Transformation of Competent Bacteria Objective: Introduction of Plasmid DNA into E. coli cells and determination of transformation efficiency Materials and Reagents: Plasmid DNA Gene of interest SOC media LB-amp media Procedure: The protocol preferred was the High-Efficiency Transformation Protocol. However, a variation occurred with 2 µl of plasmid DNA. The high efficiency transformation protocol requires thawing of competent cells in ice for about ten minutes. The next step involves transfer of 50 µl of the cells to a transformation tube using a micropipette. Adding of 2 µl of plasmid DNA into the tube followed. The next step involved placing the mixture on ice for 20 minutes. Next, exposure of cells to heat shock at 42?C occurs, a process lasting 35 seconds. Following this was adding the right amount of SOC media to the cells. After this, incubation at 37C? for 40 minutes and subsequent vigorous shaking followed. Plating of the cells in LB-amp media and overnight incubation at 37?C was the last step. In the first experiment, plating of the concentrated cell mixture without dilution occurred. In subsequent trials, there was dilution of cell solution at different dilution ratios.

Vacation Memory About Namibia Essay Example | Topics and Well Written Essays - 500 words

Vacation Memory About Namibia - Essay Example John is an American who had come to Africa in the seventies and had attempted to hike from Cairo to the Cape Town. However, when he had arrived in Botswana, he had fallen in love with the country and had chosen to settle. John had taken the liberty of hiring a vehicle for us and we all went to spend the night at his magnificent house on the outskirts of the city. Early the next morning, we left Gaborone and traveled south until we came to the Trans-Kalahari road, which connects all the countries that have the Kalahari Desert within their borders. It was here that my preconceptions of Africa being a backward place, a jungle, were forever shattered. The Kalahari Desert has a diverse ecosystem with some parts of it being semi-arid and inhabited by cattle keepers who own large ranches. Other parts are filled with sand dunes as far as the eye can see and within these, one is likely to find antelopes that have adapted to life in the desert. After every two hundred miles, there is a picnic area where long distance drivers take a break before continuing their journey. This is a measure that the government of Botswana has taken to ensure that accidents due to fatigue are avoided. We reached the Namibian border after eight hours on the road and the friendly customs officers quickly cleared us to cross into Namibia. Immediately one enters Namibia, he is struck by the level of organization that the people of this country have. One will note that all the buildings and roads are built in straight lines and that everybody is very orderly in all their activities. We were told that this characteristic was inherited from the Germans who were the first people to colonize Namibia after the partition of Africa. However, the place that fascinated me the most in this country was the city of Windhoek, which is the cleanest and best-organized city I have ever seen.